What this Recording Time Calculator does
The Recording Time Calculator estimates how long uncompressed PCM audio can be recorded before the available storage is filled. It uses the storage capacity, sample rate, bit depth, and number of channels you enter. The result is expressed in seconds, which makes the calculation direct and easy to compare with a planned session length.
The estimate assumes decimal storage units, where one gigabyte is 1,000,000,000 bytes, and standard PCM data with no additional compression. It calculates audio payload capacity only. File headers, metadata, formatting, and other files occupying the same drive can reduce the practical recording time, so leave a margin when planning a session.
This tool is useful when choosing settings for a field recorder, studio interface, or portable recording device. It can also help estimate whether a memory card or drive has enough room for a rehearsal, interview, concert, or multitrack session. Treat the result as a planning estimate rather than a guarantee about a device's remaining record time.
How to use the Recording Time Calculator
Enter the amount of storage available for audio, then set the sample rate, bit depth, and channel count that match your recording format. The default values provide one example of stereo recording at 48 kHz and 24-bit depth. Change each value to match the actual project or device settings.
- Available storage is the capacity reserved for the recording, in decimal gigabytes.
- Sample rate is the number of audio samples captured per second for each channel, in kilohertz.
- Bit depth is the number of bits used to represent each sample.
- Audio channels is the number of separate channels stored, such as one for mono or two for stereo.
For example, suppose a recorder has 64 GB available and is set to 48 kHz, 24-bit, stereo PCM. The formula is 64 × 8,000,000,000 ÷ (48 × 1,000 × 24 × 2). The result is 222,222.22 seconds, or about 61.73 hours after dividing by 3,600 seconds per hour. The calculator displays the seconds value, so the conversion helps put a long result into a more familiar form.
Use storage that is genuinely free for the session, rather than the total capacity printed on a card or drive. If the recording is split across multiple files, the total audio duration is still estimated from the combined available space, as long as all files use the same settings.
How the Recording Time Calculator formula works
Uncompressed PCM audio stores each sample as a fixed number of bits. The amount of audio data created each second is the sample rate multiplied by the bit depth and the number of channels. The calculator converts the sample rate from kilohertz to hertz and converts storage from gigabytes to bits by multiplying bytes by eight.
The formula is storage in GB × 8,000,000,000 ÷ (sample rate in kHz × 1,000 × bit depth × channels). The numerator represents available storage in bits. The denominator represents the number of bits needed for one second of audio. Dividing storage bits by bits per second produces a duration in seconds.
For the example above, 48 kHz means 48,000 samples per second per channel. At 24 bits and two channels, the data rate is 48,000 × 24 × 2, or 2,304,000 bits each second. The available 64 GB corresponds to 512,000,000,000 bits under the decimal convention. Dividing those values produces approximately 222,222 seconds.
This calculation does not use a codec or a compression ratio. It therefore represents a predictable raw PCM estimate. Lossless and lossy compressed formats can store different amounts of audio per gigabyte, and their size depends on format behavior and the audio content. The calculator does not attempt to model those formats.
Use cases for the Recording Time Calculator
Recording duration estimates can inform practical preparation before a session. A few common scenarios include:
- Planning a live recording: Estimate whether a card has room for the expected set and encore at the chosen sample rate and bit depth.
- Preparing interviews: Check whether available storage can cover several conversations recorded in mono or stereo.
- Managing multitrack sessions: Account for each separately recorded channel, since adding channels increases the audio data rate.
- Comparing recording settings: See how higher sample rates or bit depths affect the duration supported by a fixed amount of storage.
- Checking portable setups: Estimate a safe recording window when a recorder has limited storage available.
For a multitrack project, count the number of channels written to storage, not only the number of performers or instruments. A four-microphone recording saved as four mono tracks creates four channels of audio data. If the recorder combines or processes tracks in a way that changes the saved format, use the actual stored channel count and settings.
Other factors to consider when calculating recording duration
The formula is intentionally focused on PCM audio data. Real recording systems also consume storage for file structures and may reserve some space for safe operation. Formatting can make a drive's reported capacity differ from the label, and a recorder may stop before every nominal byte is available. Use the free capacity reported by the device when possible, then allow extra room for uninterrupted recording.
Some workflows create separate safety tracks, duplicate recordings, or additional microphone channels. These increase the total data written. If two identical files are recorded simultaneously, the storage use is roughly doubled, which can be represented by counting both sets of channels. Likewise, leave room for accompanying video or session files if they share the same storage.
Compressed audio requires a different estimate. Variable-bitrate encoding changes data use with the audio material, while fixed-bitrate formats depend on the selected bitrate. For those formats, use the recorder or codec's bitrate information and a calculation based on that rate. Do not interpret this PCM estimate as an accurate duration for an unspecified compressed format.
Finally, recording duration can be limited by battery life, file-size limits, device temperature, or software settings before storage runs out. Verify the recorder's displayed remaining time and format-specific limits before an important event. A brief test recording can confirm that the chosen settings, channels, and storage behave as expected.
Recording Time Calculator FAQ
Does the calculator estimate compressed audio?
No. It estimates uncompressed PCM audio using sample rate, bit depth, and channel count. Compressed formats need a bitrate or codec-specific estimate, which this calculator does not include.
Why is the result shown in seconds?
The formula divides total storage in bits by the number of bits recorded each second, so seconds are the natural output unit. Divide by 60 for minutes or by 3,600 for hours.
Should I enter the full capacity of my memory card?
Enter the capacity actually available for the recording. The device's formatted capacity may be lower than the advertised capacity, and existing files or reserved space reduce what remains.
How do additional channels affect the estimate?
Each channel adds another stream of samples at the selected sample rate and bit depth. More channels therefore increase the data rate and reduce the estimated time for the same storage capacity.
Can I rely on the result for an entire concert?
Use it as a planning estimate and keep spare capacity. Recorder limits, file overhead, battery life, and the actual free space can change the usable duration, so check the device's remaining-time display before recording.