The FIFINE U1 Mic Pop Filter Screen review is most relevant to streamers, podcasters, and voice-over creators who want a compact shield that attaches directly to a compatible microphone.
Its curved metal mesh, replaceable elastic bands, and rubber-lined frame offer a low-profile alternative to a freestanding filter.
FIFINE U1 Pop Filter Review Summary
The quick verdict

500+ ratings
Read Amazon ReviewsFIFINE U1 Mic Pop Filter
A practical option for compatible microphones when you want a compact plosive shield that mounts directly to the mic and stays clear of your face.
- Curved metal mesh screen designed to reduce wind, air blasts, and plosive noise.
- Wraparound, microphone-mounted design intended to keep moisture away from the diaphragm and reduce face obstruction.
- Fits the FIFINE K669, K669B, K670, K670B, K683A, K678, and K690, plus microphones between 40 and 70 mm in diameter.
- Includes two extra flexible rubber bands, sized 1 4/5 inches and 2 1/5 inches, for replacement or fit adjustment.
Pros
- Attaches to the microphone itself, keeping the desk or boom setup compact.
- Includes specific compatibility guidance and extra bands for adapting the fit.
Consider before buying
- Compatibility depends on both the microphone's dimensions and model; some dynamic models are specifically discouraged.
- The mic-mounted design may not suit buyers who prefer to position a separate filter independently in front of the microphone.
Read the full review summary
The U1 wraps around a microphone rather than extending in front of it on a separate arm.
That keeps the setup compact and may reduce obstruction around the speaker, while the screen is designed to intercept wind, air blasts, and plosive noise before they reach the mic.
The shield also helps keep moisture away from the diaphragm.
Fit is the deciding factor. It is listed for several FIFINE models and microphones with diameters from 40 to 70 mm, with two additional bands included to accommodate different sizes.
FIFINE specifically advises against using it with dynamic microphones such as the AM8, K688, and TANK3, so check your exact mic and its diameter before buying.
The buying factors
FIFINE U1 Pop Filter Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Compatibility clarity
The description names supported FIFINE models, a diameter range, and specific dynamic-mic examples to avoid.
Plosive control design
The curved mesh shield is designed to block wind, air blasts, and plosive noise at the microphone.
Compact setup
Its microphone-mounted form avoids a separate filter arm and is intended to create less obstruction near the speaker.
Fit flexibility
Two replacement bands in different sizes give buyers some room to match the frame to their microphone.
Mic protection
The wraparound screen helps keep moisture away, and a soft rubber pad is intended to protect the mic from scratches.
Setup simplicity
A custom handle on the elastic band is intended to make mounting straightforward.
Key Features and Specifications of FIFINE U1 Pop Filter
- Curved metal mesh screen designed to reduce wind, air blasts, and plosive noise.
- Wraparound, microphone-mounted design intended to keep moisture away from the diaphragm and reduce face obstruction.
- Fits the FIFINE K669, K669B, K670, K670B, K683A, K678, and K690, plus microphones between 40 and 70 mm in diameter.
- Includes two extra flexible rubber bands, sized 1 4/5 inches and 2 1/5 inches, for replacement or fit adjustment.
- Soft rubber padding inside the frame is intended to protect the microphone from scratches.
- Package includes the curved screen, two extra rubber bands, and a user manual; the microphone is not included.
Pros and Cons of FIFINE U1 Pop Filter
Pros
- Attaches to the microphone itself, keeping the desk or boom setup compact.
- Includes specific compatibility guidance and extra bands for adapting the fit.
- The mesh shield is designed to address plosives while helping keep moisture off the mic.
- Rubber padding helps prevent the frame from scratching the microphone.
Consider before buying
- Compatibility depends on both the microphone's dimensions and model; some dynamic models are specifically discouraged.
- The mic-mounted design may not suit buyers who prefer to position a separate filter independently in front of the microphone.
- The microphone is not included, so this is an add-on for an existing compatible setup.
Who Should Buy FIFINE U1 Pop Filter?
Good fit
Consider the U1 if you want a compact pop shield for a supported FIFINE microphone or another mic that measures within the stated 40–70 mm range.
Its frame mounts directly to the mic, making it a reasonable fit for streaming, gaming, podcasting, and voice-over arrangements where a separate screen could take up space.
Before ordering, check the microphone model and measure its diameter where the band will sit.
If you use a dynamic mic, take FIFINE's warning seriously and confirm compatibility for your exact model; the description specifically advises against the AM8, K688, and TANK3.
The included extra bands provide fit options, but they do not override model-specific guidance.
Who should skip it
Skip it if you use one of the dynamic microphones FIFINE advises against, or if your mic falls outside the stated diameter range.
Also look elsewhere if you need a filter that can be positioned independently of the microphone.
How the FIFINE U1 Pop Filter Fits a Recording Setup
A shield that follows the microphone
Because the U1 attaches around the mic, it places the mesh close to the sound source without requiring a separate arm.
That can simplify a crowded desk or boom setup, though the fixed relationship between screen and microphone offers less independent positioning than a freestanding filter.
Fit deserves a quick check
The listed 40–70 mm range and named FIFINE models make it easier to judge fit than a product with no compatibility guidance.
Measure the section where the band will sit and verify the model first, especially if you own a dynamic mic; a listed diameter alone should not be treated as a substitute for FIFINE's model guidance.
What the mesh and wraparound frame are for
The curved metal mesh is designed to interrupt bursts of air associated with plosives and to block wind. The wraparound shape also helps keep moisture away from the diaphragm.
These are practical reasons to add a shield, but the description does not quantify how much noise reduction to expect in a particular room or recording.
Bands and mic contact
Two extra elastic bands provide replacement and size options, while the custom handle is meant to make mounting easier.
The soft rubber pad adds a layer between the frame and microphone body, which is useful for buyers concerned about scuffs; check that the band sits securely without forcing it over a control or connector.
Alternatives to FIFINE U1 Pop Filter
No alternative model is recommended here. Compare the design and features that matter to your recording routine before choosing another option.
Is FIFINE U1 Pop Filter Worth It?
The FIFINE U1 Mic Pop Filter is worth considering if your microphone is compatible and you want a compact, mic-mounted screen for streaming, podcasts, or voice work.
Its curved metal mesh, fit bands, and rubber-lined frame make the design practical for a tidy setup.
The main tradeoff is compatibility: verify your mic's model and diameter, and follow the stated caution for dynamic microphones.
If your mic is among the discouraged models or you want to position the filter separately, choose a design better suited to that setup.
Your review at a glance

500+ ratings
Read Amazon ReviewsFIFINE U1 Mic Pop Filter
A practical option for compatible microphones when you want a compact plosive shield that mounts directly to the mic and stays clear of your face.
- Curved metal mesh screen designed to reduce wind, air blasts, and plosive noise.
- Wraparound, microphone-mounted design intended to keep moisture away from the diaphragm and reduce face obstruction.
- Fits the FIFINE K669, K669B, K670, K670B, K683A, K678, and K690, plus microphones between 40 and 70 mm in diameter.
- Includes two extra flexible rubber bands, sized 1 4/5 inches and 2 1/5 inches, for replacement or fit adjustment.