The SmallRig Cold Shoe Mount review is for camera builders who need a simple way to add a shoe-mounted accessory to a compatible cage, handle, or plate.
The 2060 set includes two aluminum mounts and the screws and tools for attaching them.
SmallRig Shoe Mount Review Summary
The quick verdict

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical two-piece option for camera builders who want to add a microphone, flash, or LED to a compatible cage, handle, or plate.
- Two cold shoe mounts are included in the package.
- Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
- Made from aluminum alloy.
- Mounting hardware includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
Pros
- The two-piece pack can add shoe positions in more than one place on a rig.
- Includes both 1/4-inch-20 and M2.5 fasteners for supported mounting configurations.
Consider before buying
- Compatibility depends on having a suitable threaded mounting point; it is not a universal fit for every camera or support.
- The product is specifically unsuitable for DJI and ZHIYUN gimbals.
Read the full review summary
The 2060 is a compact mounting solution centered on a straightforward job: provide a cold shoe where a compatible camera support has a 1/4-inch or M2.5 threaded hole.
Its two-mount package can help when a rig needs more than one accessory position, and the included fasteners support different mounting arrangements.
This design suits people assembling modular camera rigs for microphones, flashes, or LED lights.
Its value depends on matching the available threaded hole and the accessory’s shoe interface to the mount; the listed compatibility notes also rule out DJI and ZHIYUN gimbals, so gimbal users should check carefully before choosing it.
The buying factors
SmallRig Shoe Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Rig compatibility
Supports mounting through 1/4-inch or M2.5 threaded holes, with specific cage guidance and exclusions to consider.
Mounting flexibility
Two screw approaches suit compatible cages, handles, plates, and other camera accessories.
Accessory usefulness
Provides a shoe for common rig additions such as a microphone, flash, or LED.
Package completeness
Includes two mounts, two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
Rig footprint
Each mount measures 25 by 25 mm, a compact format for adding an attachment point.
Fit certainty
The threaded mounting approach is clear, but buyers still need to confirm their rig's exact hole and device fit.
Key Features and Specifications of SmallRig Shoe Mount
- Two cold shoe mounts are included in the package.
- Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
- Made from aluminum alloy.
- Mounting hardware includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
- Designed for camera accessories with 1/4-inch or M2.5 threaded holes, including compatible cages, cold shoe blocks, handles, and plates.
- The shoe can hold a microphone, flash, or LED on compatible camera rig components.
- Two white arrows indicate mounting direction, and bent bevels at one end are designed to help prevent accidental removal.
Pros and Cons of SmallRig Shoe Mount
Pros
- The two-piece pack can add shoe positions in more than one place on a rig.
- Includes both 1/4-inch-20 and M2.5 fasteners for supported mounting configurations.
- Compact 25 mm square footprint and aluminum alloy construction.
- Clear orientation arrows make the intended mounting direction easier to identify.
Consider before buying
- Compatibility depends on having a suitable threaded mounting point; it is not a universal fit for every camera or support.
- The product is specifically unsuitable for DJI and ZHIYUN gimbals.
- For most cages, the instructions call for the 1/4-inch-20 screw alone; the M2.5 holes are unnecessary in that setup, with an exception noted for SmallRig Full Cage 1661.
Who Should Buy SmallRig Shoe Mount?
Good fit
Consider the 2060 if your camera cage, handle, or plate has the appropriate threaded hole and you want a fixed cold shoe for a microphone, flash, or LED.
The two-mount package is useful when planning several attachment points or keeping a spare available for another compatible part of the rig.
Before buying, identify the threaded hole you will use and check how the shoe will sit relative to nearby controls, cables, and other rig components.
For most cages, the supplied guidance specifies securing the mount with the 1/4-inch-20 screw; if you have SmallRig Full Cage 1661 or another mounting arrangement, confirm which fastener applies.
This is a good fit for a modular setup where the mount can remain in place as a simple accessory point.
The mounting arrows and included hex spanners make the installation approach clear, while the compact dimensions should help keep the added piece from dominating a camera support.
Who should skip it
Skip this mount if you need an adjustable angle or a ball-head position for the attached device; the 2060 is a fixed cold shoe mount.
Choose another mounting approach if your setup depends on a DJI or ZHIYUN gimbal, or if you cannot confirm a compatible threaded hole on the support.
How the SmallRig Shoe Mount Fits a Camera Rig
Threaded attachment and cage fit
The 2060 connects to a support through threaded holes rather than relying on a friction clamp.
That makes checking the cage, handle, or plate before purchase essential: the correct thread and mounting location determine whether the mount can be secured as intended.
For most cages, the listed guidance uses the included 1/4-inch-20 screw, while the M2.5 hardware serves other compatible arrangements.
A compact point for common accessories
A cold shoe gives a compatible microphone, flash, or LED a place on the camera rig.
The 25 mm square size keeps the mount itself compact, but the assembled space requirement will also depend on the accessory and its orientation.
Check clearance around the intended position, especially if the rig already carries a handle, monitor, or other attachments.
Fixed placement versus aiming flexibility
This mount provides an attachment point without a described pivoting joint, so its practical advantage is a simple, stable-looking layout rather than repositioning an accessory for each shot.
If you need to tilt a light or change a monitor's viewing angle, consider a mount designed for that movement.
If a fixed position suits the setup, the 2060's arrows and bent bevels help communicate how the shoe should be oriented.
Two mounts and the installation details
Having two mounts in one package can simplify a rig that needs separate shoe positions.
The included screws and hex spanners cover the stated mounting approaches, though the instructions distinguish between ordinary cage installation and the SmallRig Full Cage 1661 case.
Confirm the relevant fastening method for your specific support before tightening the mount.
Alternatives to SmallRig Shoe Mount
Camera Flash Shoe Mounts alternative

1,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Adapter 1135
Choose the 2060 for simple fixed shoe positions and a two-mount package. The 1135 is a better fit when you need to adjust an accessory's angle, provided the device stays within its stated weight guidance.
- The 1135 uses a double ball head with 180-degree rotation, a side wingnut, and a cold shoe plus 1/4-inch screw.
- Its guidance does not recommend monitors or LED lights over 1 kg.
- The 2060 is a fixed shoe mount supplied as a two-piece set and attaches through compatible threaded holes.
Camera Flash Shoe Mounts alternative

700+ ratings
Read Amazon ReviewsSmallRig Mini Ball Head Mount 3577
The 2060 suits buyers who want a fixed shoe and two mounts. Consider the 3577 if adjustable tilt and a lightweight single mount matter more, while checking that the attached device stays within its 250 g support limit.
- The 3577 has a ball head that tilts up to 138 degrees, a 1/4-inch screw for a light or microphone, and a cold shoe adapter at the base.
- It supports devices up to 250 g and weighs 20 g.
- The 2060 attaches to a threaded hole and provides a fixed cold shoe for a compatible accessory.
Is SmallRig Shoe Mount Worth It?
The SmallRig Cold Shoe Mount 2060 is worth considering when you have a compatible threaded camera support and want a compact, fixed shoe for a microphone, flash, or LED.
Its two-piece package and included mounting hardware make it a practical choice for modular rigs.
Check the hole type and cage-specific fastening guidance before ordering, and avoid it for DJI or ZHIYUN gimbal setups. If you need to angle an accessory, a ball-head design is a more suitable style of mount.
Your review at a glance

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical two-piece option for camera builders who want to add a microphone, flash, or LED to a compatible cage, handle, or plate.
- Two cold shoe mounts are included in the package.
- Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
- Made from aluminum alloy.
- Mounting hardware includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.